Wednesday, October 27, 2021

Some Celluclay use results

After 24 hours of drying, most of the Celluclay used to shape the lower level had dried except for the area around the stairs. I had squeezed in a couple of wads that were about 1" or so thick, and that was probably too thick to dry properly.


I decided to scoop it all out and put in some foam pieces to cut down on the thickness of Celluclay required for shaping this section.




With the filler blocks in place I'll reapply a much thinner Celluclay coat, which should dry properly.

The other applications dried quite hard and are ready for a little shaping and painting.

No comments:

Post a Comment