Letters for A&A Records

I did a bit of work on cutting the basic shapes for the A&A sign from clear plastic.

First, the two pieces were cut from the drawing, which was done on a sheet of Bristol board, and then used as tracing templates. Once the shapes were traced on the plastic with a fine-point Sharpie pen, they were carefully cut out. 

The first attempt on the inner piece caused a nasty crack to develop while cutting the base on the left A, so it was scrapped, and a second was made - good thing I used a template to make drawing shapes easy. These pieces need a lot of cleanup, but it's not too bad a start.