Thursday, January 16, 2025

The mountain gets some colour

I've been putting off painting the base layer on the Mt. Lowe layout for some unknown reason. Last week I decided to get on with it and went out and bought some acrylic paint I'd need to supplement the stock I had on hand. I then threw caution to the wind and painted all weekend.

I'd like to give you a step-by-step guide to painting the mountain, but I can't as this was the first time I've painted such a thing - the Loonar Module was a prelude, but hardly of the same scale - and there was a lot of trial-and-error involved. And my technique needs much refinement. 

I will mention a few things though, mainly so I have a reference in case I do this sort of painting again.

The colours I used were (by brand and colour): 

DecorArt Americana: Neutral Grey, Cool White, Slate Grey, Fawn

Liquitex: Titanium White, Neutral Grey 5, 

Pebeo: Raw Umber

Golden SoFlat: Burnt Umber

Golden Fluid Acrylic: Ultramarine Blue, Raw Umber.


The paint was applied in loose mixtures, usually combined with a lot of white to mute the strong colours. The primary mixtures were (mixed with white as I've noted):

Ultramarine blue and raw umber,
Slate grey and fawn.

Although, as the palette started to develop, the mixtures became more complex and I simply developed and applied whatever interesting colours were forming. In some places I got a little carried away with blue highlights, but I'll adjust those areas later.


To improve blending in some areas the paint was spritzed with a little bit of water. 

Several areas were given a thin wash of the Fawn colour to bring some unity to the base colours, and with the tones in Poppyfield Flats.

I'm noticing that the layout's colours vary a lot depending on lighting conditions. I like that as that's what I observed on the Mt. Lowe trail. There are lots of interesting detail areas amongst the layout's rock faces that don't come through in the photos, and depend on lighting to appreciate them. The weather is too bad these days to take this thing outside to look at it in sunlight, but once spring is here, outside it will go.


It's good to have at least the base layer on because it's now easier for me to visualize the colour contrasts in the various scenes. Previously, with the white trolley and the white mountains, contrasts were difficult for me to properly imagine. Now I can clearly see that the whites of the trolley, the trolley wire support posts, the circular bridge, and the Poppyfield Flats station are going to pop against the rock greys and the greens of the trees and vegetation. On the Experimental Farm layout the red fence posts that snaked through the layout provided the contrasting thread that pulled the layout together. Here it will be the white trolley wire support poles.

Wednesday, January 15, 2025

Pencil sharpening like it was 1975

The red square shows the pointer I bought in 1975 at the Grand & Toy in Cedarbrae Mall

Over the Christmas holidays, when covid wasn't having its way with me, I worked on a stack of drawings for projects I'd like to build this year. I showed the one for Inspiration Point in a previous post. Above is one for an old, repurposed firehouse I saw when I was on Cape Breton Island last year.

Unfortunately my old mechanical pencil pointer gave up the ghost during this marathon drawing session. I thought its pointing days were over. Well, at least until I consulted that fount of all things we call The Internet.

The cups arrived as advertised: old, but never used

It's turns out the pointer was made by a company called Tru-Point in Michigan. The problem I was having centred on a little cup inside the thing that has an abrasive paper liner that does the sharpening. Mine was worn flat and torn so it wouldn't sharpen, and it jammed the device when I tried to rotate a pencil in it.

By some miracle a search of eBay turned up a seller in Calgary who had a 'new old stock' of 3 never used replacement sharpening cups - and in their original box too! They arrived quickly, and I was soon back in the pencil sharpening business. 

New cup installed and ready for action!

I guess it shouldn't be, but it still seems amazing that I can buy a new-old replacement part for something I bought 50 years ago. Given the high quality of the sharpener, and the fact that I've still got 2 new replacement sharpening cups, I should be good for drawing like it was 1975 for quite a long time.

Saturday, January 11, 2025

Ground colour at Poppyfield Flats

I'm making some attempts at painting the terrain. As I've mentioned before getting the colours right could be tricky because all I'm working from are my own travel photos, photos I've found on line, and memories from hikes on the Mt. Lowe trail. Then there are the colour shifts introduced by printing the reference photos on paper, or viewing them on a screen. Unlike the Loonar Module I don't have any samples of local rocks and soil, and I don't have a long, deep experience of living in or visiting the area. 

This is all to say layout colouring will be a long series of approximations, but in the end the deciding factor will be asking if the colours look right and hang together. 

Painting Poppyfield Flats was a two step process. First, a base layer of blobby, loose mixtures of DecoArt Americana acrylics Fawn and Desert Sand, accentuated with a little Golden So Flat Matte Acrylic Burnt Sienna and Burnt Umber were laid down. When dry, a diluted layer of DecoArt Americana Fawn was washed over the entire base layer. This had the effect of evening out the overall appearance, but still letting areas of the base layer show through. Painting continues.

Thursday, January 9, 2025

Quetzalcoatlus Corridor

I've been talking to Galen about operational aspects of this little layout. He mentioned that John Allen had a principle that adding some scenic stops along a route - in this case from Poppyfield Flats to Inspiration Point - could provide some operational variety. Well, there were already some, scenic stops that is, but along the mountain's back face it was rather bland, so I tried to give some thought about what to do there.


Well, one evening, maybe after one too many jars of the water of life, I was reminiscing about my brief career as a junior aerodynamicist in the 1980s. In the 80s I was fascinated by aviation pioneer Paul MacCready's attempt to build and fly a replica of Quetzalcoatlus northrupi, the largest of the pterosaurs, for the Smithsonian's National Air and Space Museum. Long story short, those reminisces finally alit on the idea to include a petroglyph gallery along Mt. Lowe's back rock face, which would feature a large petroglyph of a very large Q. northrupi. 

Before you suggest I seek psychological assistance, I regularly deal in anachronisms, so please don't call the white coat brigade just yet.  

Roughing in the gallery stairs with 1/8" thick foam and pink foam scraps for support

In designing the gallery I wanted to communicate an air of fear. I wanted the gallery to be rather scary to get to, hence the steep, narrow, and crumbly stairs down to the gallery's viewing area. I wanted it to remind me of both hiking the Angel's Landing trail in Utah's Zion National Park and the trail to the Agawa Rock pictographs in Lake Superior Provincial Park.

Expanding the gallery floor and adding foam supports. A hot glue gun is used to stick it together.

As far as I know there aren't any petroglyph sites along the Mt. Lowe line, so this is all a fantasy on my part. 

And I think the only site where Q. northrupi fossils have been found is in Big Bend National Park in Texas, not in California's San Gabriel mountains. So, more fantasy.

Fascia is made from strips of 1cm wide foam

Although, there is a California connection, albeit a week one: Paul MacCready's company, AeroVironment, that built Q. northrupi flying model, was located in Monrovia, California, in the foothills of the San Gabriel Mountains, near Altadena and Pasadena*, the home of the Mt. Lowe Railway. 

Cell-u-Clay is used to blend everything together

And who's responsible for those petroglyphs? I'm going to place the blame on some early 20th century palaeontologists and cryptozoologists who took Arthur Conan Doyle's book The Lost World a little too seriously, went looking for pterosaurs in the San Gabriels with a hope of supplementing the Mt. Lowe zoo with them, got lost, and ... well, the rest we'll never know.


--------
*As I write this post Altadena and Pasadena are being consumed by the horrific Eaton wildfire that started in the Eaton Canyon of the San Gabriel Mountains. I’ve visited Pasadena, Altadena, and Monrovia a few times in my life. The people and places are great, and I wish everyone courage and strength in the face of this devastating event.

Friday, January 3, 2025

Recently updated: Marmora station posts

Last night I happily stumbled across some photos of Marmora station and an excellent model of it here and here by George Dutka at his White River Division blog. A few years back I had posted a couple of photos of the station I had shot in the 1970s, and some of those photos I had misidentified. I took the opportunity to go and fix up those posts (here and here and here) as best I could given what little information I have on hand. I need to go back through my photos and finish scanning, identifying, and posting them.