I did a little bit of clean up after gluing the walls together, and then took it outside for a couple of photos. It was hot and sunny, so all the shadows are strong. You can see there's a rather nice patio out back.
Sunday, July 28, 2019
A paper metal revival?
Voie Libre International never fails to surprise and delight. Among other interesting stories, issue #98, July / August / Sept 2019, has a fascinating article called Making Corrugated Sheet-Metal Out of Paper, by Éric Fresné, where he discusses a method for making 1/76 scale corrugated metal panels from paper. You may recall E. L. Moore had a way of making those sorts of panels in HO, but I think Mr. Fresné's method gives a better result, and I suspect it should work quite well in HO too. It turns out there's no connection between Mr. Fresné and Mr. Moore other than a creative outlook.
Sunday, July 21, 2019
Walls Up!
I spent a little time here and there over the last few days to finish off the walls. I figured if I could glue them into a box, I might be encouraged to speed things up on this project.
Mission accomplished! The walls have been glued together, and are awaiting clean-up before proceeding on to finishing interior detailing.
I had to take a picture after all the window 'glass' was installed and the lower wall trim was in place.
This is the only photo I took during wall assembly. There was considerable trimming, adjusting, and fiddling to get good alignment and passable corner joints. Still, there's going to be some cleanup before moving on to detailing.
Mission accomplished! The walls have been glued together, and are awaiting clean-up before proceeding on to finishing interior detailing.
I had to take a picture after all the window 'glass' was installed and the lower wall trim was in place.
This is the only photo I took during wall assembly. There was considerable trimming, adjusting, and fiddling to get good alignment and passable corner joints. Still, there's going to be some cleanup before moving on to detailing.
Saturday, July 6, 2019
He uses trains as dental floss
While escaping the heat in the comfort of an air-conditioned hobby shop, what did my sunburnt eyes see, but none other than Polar Lights' re-pop of the original - accept no modern-day re-boots - Godzilla!
It's been a long wait for this day. I've been walking around unattended all this time not knowing this kit was out there. I need to get out more. Who knows what other wonders await.
As the box says, it's 16 horrific inches tall, and the internet says it's in 1/144 scale, which is very gosh darn close to N scale. Maybe I can say he's actually HO, but awaiting a growth spurt :-)
When I'm 65, I can only hope that I too will be out there stomping on hideous modern towers, swatting away pesky airplanes, while happily astride a diorama base featuring crushed buildings and a tank.
It's been a long wait for this day. I've been walking around unattended all this time not knowing this kit was out there. I need to get out more. Who knows what other wonders await.
As the box says, it's 16 horrific inches tall, and the internet says it's in 1/144 scale, which is very gosh darn close to N scale. Maybe I can say he's actually HO, but awaiting a growth spurt :-)
When I'm 65, I can only hope that I too will be out there stomping on hideous modern towers, swatting away pesky airplanes, while happily astride a diorama base featuring crushed buildings and a tank.
Studio tour
The video is a tour of my friend John Belt's studio at SUNY Oswego. After 43 years he's retiring from teaching Tech Education, and the video is a last look at the studio before dismantling. This is not a single sitting video. It's long and detailed and needs a few short sittings to see everything. There's a few objects in the video that I too have, and no doubt while I'm holed-up here, escaping the heat, I'm going to look through my shelves to see if I can find them.
The video got me reminiscing about the old posts from 2011 on the Museum-Gallery-Studio classification system of model railroads. Over the years the ideas discussed there morphed into something called The Trains Preserve in 2016, and then this year I got to thinking of other variations when it struck me that Bill Schopp was the amateur scientist - in the Scientific American sense - of model railroading and his layout was his studio/lab. That's the kind of thing I'd like to build: free-form, easy to change and try things, but with areas for setting up photos that can be changed around as ideas change. A sort of model-making / model-streetcar-system Exploratorium (or at least an Exploratorium as I remember seeing it at the Palace of Fine Arts in the '80s.)
Subscribe to:
Posts (Atom)







