Sunday, March 1, 2026

Dust never sleeps

The winter blahs have got a hold of me, so progress on projects has been slow to nonexistent. I did though do some cleaning on the Loonar Module. I used some damp tissues to dab dust off tree boughs, cleaned gunk off the track, mopped up dust from the water, repaired a ding in the fascia, repoured a little gloss medium 'water', and painted the previously unpainted custom stand I built for the layout.

When I stood back and had a look I realized I'm going to have to have a hard look at it either in sunlight or under my photo lights because the lighting in my workshop isn't good enough to assess the layout's colours and remaining dustiness. I'll have to think about how to proceed.


After the dusting came the running. I took the loco and a couple cars out for some loops. After a little oiling and wheel cleaning all ran well.

Tuesday, February 17, 2026

Dusty Trees

Over the weekend a friend got in touch and asked if I was going to the Ontario Narrow Gauge Show in May, and if so, would I consider bringing the Loonar Module? It's around a 500 km and 5 hour or so drive from here, so it's a long trip, but that aside, the Loonar Module is looking pretty dusty these days, especially the central tall pines and lake. I decided to take it down to the workshop to try and clean it up and revive it over the next few days to see if it can be made presentable. As well, I'm not sure how it will stand up to a long trip. 

Ok, first things first, dust removal and 'sprucing' up, logistics later. Well, while I'm at work, I'll leave you with the Dusty you're likely thinking about, Dusty Springfield.

Monday, February 16, 2026

Way Out Layout Runabout, Part 4: Testing, testing, 1, 2, 3, testing.

Trying to make sense of the guts of the Peter Witt streetcar


As soon as I had cleaned up stray matte medium from the track after ballasting I got out some streetcars for test running as many had not been out for loops in several years; the Bachmann TTC Peter Witt being one of them.


It always was a poor runner since I bought it new in 2013. Since I have plans for it to run on the Taronna layout I wanted to figure out the root cause of the problem and see if I could fix it.


Long story short, it turns out the power pick up on part WT24 on the right side of the rear truck was not making contact with plate WT23. This meant the rear truck wasn’t picking up any power, so the streetcar would stall out while trying the pass through nearly half the layout’s switches. WT24 had not been installed properly at the factory, and its pickup was bent inside the body instead of being outside and sprung against WT23. Some careful bending with a pair of tweezers fixed things up.


Yes, I know this gobbledygook makes no sense at all to readers who don’t own a Peter Witt, so I’ll just call it a screw up at the factory that meant the rear truck wasn’t picking up power. If it was test run at the factory only on switchless track this problem would never have been noticed. It should have been discovered if they had tested by applying power directly to the wheels of each truck.


Theoretically I should have resolved this problem years ago. Thing is, with the Way Out Layout running properly, and the workshop reorganized, I felt motivated to press on and get the Peter Witt problem fixed. Hopefully that’s a good sign for future success.


Here’s the Peter Witt running smoothly through the switches at the front of the layout without stalling.


Friday, February 13, 2026

Way Out Layout Runabout, Part 3: The Friendly Ballaster

Track ballasting continues on the Way Out Layout.
Some rudimentary track weathering is up next.

I seem to have a strange relationship with the Way Out Layout. At one time I thought of it as an honest to goodness layout; a successor to the Lost Ocean Line. These days I view it as a test layout for helping me develop Taronna and the Community Gardens layouts, but I feel compelled to at least sort of finish it to bring it up to the concept I originally had for it. Ok, I admit, it's way more finished than the usual utilitarian test bed. 

Maybe what I'm testing is my resolve to get something more-or-less finished before diving into new projects.

Ballasting supplies laid out and ready for action.

As I've been ballasting away I started to think that maybe the Way Out Layout has a lot in common with The Friendly Giant's old tv layout.

The Friendly Giant's tv layout at the PumpHouse Museum.

Last year I went with my cousin to visit the PumpHouse Museum in Kingston. Much to my surprise they had the model railway used on The Friendly Giant tv show. 


It was in pretty good shape. I know, the Way Out Layout doesn't look like it, but they're around the same size, and neither are meant to be serious layouts, just a bit of railway pleasantness. 

Well, after ballasting, some scenic tuneup is in order and then it's on to new layout work once I've been suitably inspired.

Wednesday, February 11, 2026

Desert Dodge Do-Over, Part 9: Scenes from a workbench

A day or so ago I was watching a video of a Tamyia car kit I've had my eye on for a long time being built. Every step was done very 'professionally'. The assembler wore black, skin tight gloves through every step. The cuts were made with surgical precision. Every part was airbrushed with a spotless, chrome plated, high-end airbrush under a clean room level spray hood with intricate and flawless masking. Even the 'weathering' was sprayed on with surgical precision as if no weather played any part in the matter.

In the end the model was flawless.


And characterless.


I'd like to see more liveliness; more personalization; more customization; more memories; more desire; and more heart.