![]() |
| Trying to make sense of the guts of the Peter Witt streetcar |
As soon as I had cleaned up stray matte medium from the track after ballasting I got out some streetcars for test running as many had not been out for loops in several years; the Bachmann TTC Peter Witt being one of them.
It always was a poor runner since I bought it new in 2013. Since I have plans for it to run on the Taronna layout I wanted to figure out the root cause of the problem and see if I could fix it.
Long story short, it turns out the power pick up on part WT24 on the right side of the rear truck was not making contact with plate WT23. This meant the rear truck wasn’t picking up any power, so the streetcar would stall out while trying the pass through nearly half the layout’s switches. WT24 had not been installed properly at the factory, and its pickup was bent inside the body instead of being outside and sprung against WT23. Some careful bending with a pair of tweezers fixed things up.
Yes, I know this gobbledygook makes no sense at all to readers who don’t own a Peter Witt, so I’ll just call it a screw up at the factory that meant the rear truck wasn’t picking up power. If it was test run at the factory only on switchless track this problem would never have been noticed. It should have been discovered if they had tested by applying power directly to the wheels of each truck.
Theoretically I should have resolved this problem years ago. Thing is, with the Way Out Layout running properly, and the workshop reorganized, I felt motivated to press on and get the Peter Witt problem fixed. Hopefully that’s a good sign for future success.
Here’s the Peter Witt running smoothly through the switches at the front of the layout without stalling.

No comments:
Post a Comment