Tuesday, February 11, 2020

Plates removed

Maybe this is too detailed to discuss here, but here goes: Way-back-when I installed these metal plates between the panels. I thought they added extra stiffness and a 'mechanical' look to the layout. Ultimately, I figured all they added was frustration. One objective of the panel approach was to allow individual panels to be freed so they could be taken outside to the backyard for photos in natural sunlight. With these plates I'd have to remove between 7 and 14 bolts - depending on a panel's location - to free a panel: some from each plate, and 3 from each inter-panel edge connection. I got rid of the plates and reduced the inter-panel connections from 3 to 2 bolts. Wiring is connected with plugs, so no problem in that area. Again, like the ocean module extension, minimalism is the goal. I don't seem to have adversely impacted the layout, although without all the redundant bolts I'll need to be a little more careful when moving around bolted panels.

Monday, February 10, 2020

Ocean loop structural extension

The layout frame needed extending to accommodate the ocean module. What I added is a bit on the Rube Goldberg side, but all I wanted to do was satisfy my requirements in the most minimal way I could get away with.

When the layout isn't being used to test streetcars, or being shown off, this module support will be hanging on the wall. It's only bolted to the main frame so it's easy to detach.

There is a little science to its design. At first I thought I'd just add a leg to support the extension, but that would have prevented me from being able to roll the layout around at will as I work on it.


Also, the diagonal brace had to be wood - I used a piece of 1"x3" pine* - because it's in compression. When assembled, the rectangular module base - made from 1"x4" pine* - and the brace form a fairly rigid triangle. Although the base resists axial twisting fairly well, this isn't something that could handle hard use that might be encountered at a show, or with rambunctious children. I'm going to stick with this minimal frame and only add extra supports if necessary - fingers crossed that I don't find out I need extra supports by having the frame break-off :-)

*When I was shopping for pine at the local big box home improvement store my shopping technique got lots of stares. I select a piece of pine by sighting down its length and rotating it through all views to make sure the it's straight. Of course, I also try to make sure the piece is clear of knots. If a piece is warped, I set it to one side, and inspect another one. Once I found the pieces I needed, I put the rejects back. After I was done selecting pieces for this little project I noticed a few people staring like they've never seen anyone select wood before. Maybe they haven't.

Sunday, February 9, 2020

Planning the Ocean loop

For a long time I've been thinking about what the module on the ocean end of the layout should look like. I've toyed with various designs, but in the end I think a big loop to contrast with the Mortimer Park loop, and to allow continuous running*, is what I need.

There'll be some beach and ocean near that spur, and open land in the loop. I want this end to have an open feeling to contrast the dense, urban area you'd travel through to get here.

It's all sectional track taken from my spares box of decades of leftovers. The loop is a 15" radius thing. That's way too tight for diesels, but quite roomy for streetcars. At the other end of the layout the Mortimer Park loop has a 7" radius, so there's quite a contrast.

The details of the scenery may change as I build this thing, but the overall idea is that this end is going to curvy, free form, and open to maximize the contrast with downtown. 

Everything was traced out on a big sheet of paper, some dimensions were noted, and now it's ready for module building.

*Normally I don't care for running trains. I'm a model maker and like to take photos. But, when it comes to showing this to people there's an expectation that trains will run. And run in a loop**. Given that the thing is DCC, some simple multi-streetcar operations can be run if someone wants to play the transit game. I think a layout without a loop is somewhat disappointing to viewers. Luckily with streetcars, running in tight loops is not too far from the prototypical truth.

**I think of this kind of track plan as The Primal Loop, because the simple circle of track dates from the earliest beginnings of the hobby and is deeply lodged in its DNA. 

Monday, February 3, 2020

Of steel bars and highrises

The facade's base is a piece of 1/8" acrylic sheet. I've always used the score-and-snap technique to 'cut' this stuff, but have had problems with it where many times I'd accidentally break the piece, or wind up with a ragged edge. 

After a little internet searching I learned that I needed to use a substantial steel angle to snap the scored sheet against. I found a 4' steel angle at Princess Auto that did the trick. Basically, after laying out the facade on the sheet, I clamped the steel bar down on the line I wanted to score and snap, with the piece that would eventually be the model on the bench, and the scrap piece on the free end. I scored along the bar 4 or 5 times with a sharp utility knife, not with the puny x-acto shown in the photo. And, most importantly, I wore heavy work gloves and eye protection while snapping.

Sunday, February 2, 2020

Highrise start

I've been doing some work here-and-there on building highrise facades. Although I've cut out the acrylic blanks for a few buildings, I decided to start building out the facade on the one that's based on the Thomson Building as it seems iconically '70s, and is relatively simple enough to allow me to try various techniques without too much heartburn.

The blank is cut from 1/8" lightly smoked acrylic sheet. The verticals are 5' wide pieces cut from mat board, and the horizontals, which are also 5' wide, are pieces of flat black construction paper. The verticals were painted with an aged concrete colour before installing.

The horizontals and verticals are held in place with transfer tape.

As you can see, before installing a vertical, a column of horizontal pieces have to be sliced away so the vertical can be bonded directly to the acrylic blank. This is a pain, but I thought I'd get a straighter horizontal this way. I think when I build up the sides, I'll install the verticals first, then the smaller horizontals on a piece-by-piece basis.