Sunday, June 30, 2019

You won't find omnivagant in the spaghetti aisle

Omnivagant interurban layout designed by Bill Schopp*
Omnivagant: A track plan that goes everywhere and connects everyplace.

Usage: Each neighbourhood on his omnivagant streetcar layout had a least one car-stop.

Source: The word was first used to describe a trackplan in a story about a layout design called the Decatur, Jackson & Newton by Linn Westcott in the May 1940 issue of Model Railroader magazine.

A prominent editor in the model railroading press once suggested to me that the use of omnivagant in Mr. Westcott's article was a mere typographic error of the time. However, the line where it's used in the story, Provision is made for point-to-point, once-around, triple loop, omnivagant (wandering anywhere and everywhere), and switching operations, suggests that it was no error as Mr. Westcott included the accepted non-railroading definition in the sentence. Also, it's noted that although omnivagant is an archaic word, it has a history and evolved into our extravagant.

Omnivagant is not to be confused with spaghetti, which is a trackplan created for the sole purpose of covering a layout with as much track as possible to maximize train, engine, and car carrying capacity. Spaghetti layouts often become so through unrestrained additions of track over a period of time.

Omnivagant track plans are often characteristic of electric street and electric interurban model railways. When applied to traditional steam and diesel layouts they can devolve into spaghetti trackplans. Not all electric street and electric interurban model railways need be omnivagant.

*This plan appears in the 1957 3rd printing of Louis Hertz's The Complete Book of Model Railroading.

from The Dictionary of Non-Existent Model Railroad Terms, 1st ed.,1959.

Saturday, June 29, 2019

Roof of E. L. Moore's Elizabethton Depot

I looked up some shots of the roof interior for E. L. Moore's Elizabethton Depot just to get a little better look at the colours used under the eaves.

I've enhanced this photo a little to get rid of as much shadowing as I could without adding too much distortion.





One thing I've admired about this model is the way the lights were wired up. Mr. Moore has added those neat metal strips that make contact when the roof is slid over the end walls.

And look at than nice room on the right. Table, chairs, and a rug that really ties the whole thing together Big Lebowski style.

Friday, June 28, 2019

Wall-roof joint trim on the Elizabethton Depot

In a recent post about his Fallburgh / Pine Creek Park station, Galen discussed the possible need for wall trim where the end walls meet the roof. 

I mentioned the model is very similar to E. L. Moore's Elizabethton Depot - they're based on the same "prototype". I had some photos of it, but the images I posted all had the roof-wall joint line in deep shadow.








I went through my photos to see if I could find some better views, and do a little image enhancement on what I could find.

As you can see, Mr. Moore didn't apply any trim on the walls where they meet the roof.











And this is the depot's outhouse. Similar construction; no trim on that building either.

Wednesday, June 26, 2019

I'll take Casualize for 100 Alex

Casualize: To intentionally make a model more endearing than impressive.

Usage: He decided to casualize the coach model to make it feel more old-timey.

Sunday, June 23, 2019

"That would drive me crazy."

Over the last week I've worked on this project for only about 30 minutes or so. At this rate it's one of the slowest projects I've ever worked on, and might not finish until around Christmas if I'm not careful :-)

What have I been doing? Lining the window bars. 






The first thing I did was trim the glass pieces to fit the frames. As we saw earlier, they were too long as I think the manufacturer used windows from some other kit and didn't make properly sized ones for this kit.

I applied a piece of Tamiya masking tape to mark the cut line, and then used a razor saw to trim the piece along the tape's edge.





Black Sharpie pens were used to ink the moulded on ridges that delineate the window bars. I inked both the front and back so the interior view would look ok, and to give the bars a little extra feeling of solidity.

Side note: I bought a green Sharpie oil pen as I thought I'd try for green bars. I couldn't get the hang of using the pen and went back to using the black ones. 




After inking, the windows were glued into the frames. You can see the lower edges are rough and unfinished. Although the manufacturer provides some power equipment for the inside, it's clear it's just a rudimentary interior, and wasn't meant to get the scrutiny this one will. 



I've started to trim the lower parts of the walls to make everything look neat and plausible on the inside. Next time I'll post some pictures on trimming the lower sections.