Wednesday, May 6, 2026

RDC-M inspection tour of The Kanada Railway


John invited me over to run the RDC-M on his Kanada Railway. It ran a few laps and one of them is shown in the video. I was quite pleased at how well the old Bachmann drive unit ran being some 50 or 60 years old. The layout's track is quite smooth, level, and clean, and that makes a big difference too.


To round out the RDC size comparisons, here's the RDC-M parked behind a lovely Rapido RDC of John's. A big difference.


After a number of successful laps we decided to go get some hotdogs for lunch, but the presence of a hazmat team made us reconsider.

Stay tuned for more exciting adventures in RDC-M land :-) 

Brothers in RDC

I thought you might be interested in seeing how the RDC-M compares in size to some of its brethren. In the photo up there is an Atlas Proto 1000 RDC at the top, in the middle is an Athern RDC, and at the bottom is the RDC-M based on an Athern RDC body shell. The internet tells me the Atlas has the correct prototype length, and the box stock Athern in the middle should be the same length, but you can see it isn't.


So, the mini RDC is indeed quite mini.

Now, don't go gettin' all judgey about the RDCs out there, and remember that all God's RDCs got a little bit of soul. Hmmm, maybe I didn't hear that right? You can listen for yourself while I'm gone for coffee:

Tuesday, May 5, 2026

The Superb 7

After making one 3" radius curve I was pumped and made another, and then another, and then another, and so on. In no time at all I had the seven I need for this layout.

And now some serious fun is about to begin. Stay tuned!

In the meantime, warm up your time machines and get some popcorn:

Sunday, May 3, 2026

RDC-M, Part 5: Done!

I started this pleasant little project over the Christmas holidays last year. I paused awhile until I could spray paint outside in good weather. Well, a day of good weather showed up last week so I spent a little time spraying the shell.

The paint is Krylon metallic silver paint + primer. It went on quite well. I thought I'd have to go through a few rounds of painting, filling, and sanding, but that didn't turn out to be the case. Although the body work isn't award winning, it looked ok when painted, and I didn't think I could make it any better.

After a few days curing I blackened the exhaust vents, applied decals, and added airhorns and Kadee couplers, although given it sits on a streetcar chassis I don't think it could pull anything other than a single, light car, if that.

Here's a 5-second video of the RDC-M as it passes through the Way Out Layout yard on a victory lap:

Saturday, May 2, 2026

A 3" radius lunar curve

Getting ready to test the curve.

I'm going to need a few small radius, quarter-circle curves on this layout to both complete the loop around the landing pad area, and go down into the excavated pit where the monolith will be located. 

I need to make these bends as tight as possible, and it looked like a 3" (~76mm) radius was about the tightest turn I could get away with. So I got the track bending tools out again, and followed the procedure I used on the big loop around the landing pad to make this little turn.

Bent rail awaiting the installation of ties.

This curve wasn't quite as difficult as the first; maybe because I had some practice, and there wasn't as much rail to wrestle with.

Once the bend was made I had to test it. I wasn't sure if the lunar loco's wheels would bind going around the curve.


I was happy to see it handled the curve just fine. Now I need about 5 more - curves that is!