Friday, March 11, 2022

E. L. Moore's Tugboat & Barge

All photos courtesy James L. Dixon

We've seen a couple of boats by E. L. Moore before. One was a tugboat whose construction was described in Add a Harbor to your Pike, a 2-part article that appeared in the January and February 1968 issues of Railroad Model Craftsman.

The tugboat shown in the photo, the Taurus, also appeared in that 2-part article. However, the Taurus is a kit that was sold by a company called Model Shipways. ELM notes in the article that he used it to figure out how to build a boat model, and then applied that knowledge to scratch build the other tugboat and the barge, also shown in the photo.

The articles also described how to build a sail loft, which we have also seen. If all these boats and the loft could be acquired, the harbor scene from the articles could be recreated. A tantalizing idea.

Thursday, March 10, 2022

Is this the well from the Spumoni's Country Estate?

All colour photos courtesy James L. Dixon

No.

But, it's highly reminiscent of it.













Image from E. L. Moore Archives
Back in 1955 ELM published a photo essay in the July issue of Railroad Model Craftsman called Spumoni Country Estate. Over there is one of the featured photos with Ma Spumoni lifting a bucket of water from the well, and Baby Spumoni trying to keep his diaper from falling off.

It's not the same well as in the lead photo, but it may have inspired it.




There's no date on the bottom, so its vintage is a bit hard to figure out. I'm going to take a guess that it was built in the mid to late 1970s based on two flimsy pieces of 'evidence'. And what could be flimsier than some texture paper :-)

The roof is papered with a sheet that looks similar to that used on the 4th version of the Schaefer Brewery, which was built in 1979. The papering on the well's body looks like the same material used on Mr. Pottle's Potworks that was published in the September 1975 issue of Model Railroader - and come to think of it, I think ELM used the same style of roof sheets on the Potworks. So, my guess is that leftover texture papers from a project(s) undertaken in the 1970's were used to make this little model. As I've said before, this is the internet, and this is my contribution to its wild world of flimsy speculation :-)

E. L. Moore's blacksmith shop for his single stall engine house

All colour photos courtesy James L. Dixon

In 2015 when I saw the single stall engine house that was the subject of ELM's article, Home for Small Locos in the March 1973 issue of Railroad Modeler, I wondered what had happened to the accompanying blacksmith shop. I need wonder no more, 'cause here it is!

The blacksmith shop I saw back in 2015 was the one ELM wrote about in Yard Blacksmith Shop in the October 1965 issue of Railroad Model Craftsman. It was similar to this one, but the two aren't identical.




Image snipped from Railroad Modeler, Mar. '73
You can see the single stall engine house's blacksmith shop over in the image on the right snipped from ELM's Railroad Modeler article.




ELM doesn't describe how to build this little model in the article, but the construction methods look pretty much like those used in his '65 RMC article.






The end wall is quite simple. 












As is the full side wall.








Where things get interesting is inside. Unlike the RMC blacksmith shed, this one appears to have a fully preserved interior.








And finally, there's the bottom. Looks like it was built in 1969. FK? I think that refers to ELM's friend, Fred Kelley. Mr. Kelley once owned the single stall engine house model, as you can see if you look way in the back in this picture. So, him owning the blacksmith shop too doesn't seem like much of a stretch. Although, maybe the shop was meant for Mr. Kelley, but he never received it.

Wednesday, March 9, 2022

E. L. Moore's Caricatured Rowland Emett Castle survives!

All photos courtesy James L. Dixon

While we're on the subject of Rowland Emett, I was pleased to see that the castle ELM built for his Rowland Emett tribute diorama still exists. It's in rough shape, but this is one of the very earliest ELM models to have appeared in a published photo - dating from January 1956 in Railroad Model Craftsman.







I wouldn't consider any repair or restoration of this model. Like many time ravaged real castles, this one exhibits a regal beauty that shouldn't be tampered with.










As we see in the diorama photo, the castle was a background building, and didn't need to be detailed on sides that wouldn't be seen.










The stone colours are quite nice and have aged well.

Tuesday, March 8, 2022

My LOT* in life: Memories of Toronto in HO scale

World's Biggest Bookstore on Edward St.

I was chatting with Dave recently about the Canadian Press building, and I began to realize that I didn't have reference photos for many of my models of Toronto's old buildings. For me - and Dave - here's a post to fill that gap. 
Thrifty's
Thrifty's jeans store on Yonge St.















































Art Metropole
The Art Metropole building on Yonge St.. This still exists, but with different businesses. 






















Steinberg
Steinberg supermarket in Scarborough's Cedarbrae Mall.

Thomson Building
A highly selectively compressed version of the Thomson Building on Queen St. W. Note: if you look closely you can see my camera reflection :-)










 









McGregor Park Library


An extremely selectively compressed interpretation of the old McGregor Park Library on Lawrence Avenue in Scarborough.




Canadian Press Complex
And finally, what I've called the Canadian Press Complex on King St. East. The Canadian Press building, the building Dave and I were discussing, is in the centre.
















---
*LOT = Little Old Toronto