Monday, June 8, 2020

Sunday, June 7, 2020

Did Philip Jose Farmer have an interest in model building?

Back in the '70s, and into the '80s, my father read a lot of series. I recall there was James Fenimore Cooper's Leatherstocking Tales, Aleksandr Solzhenitsyn's The Gulag Archipelago, a lot of Charles Dickens' books along with Tolkien, E. E. 'Doc' Smith, Hugh Garner, Richard Rohmer, and no doubt many I've forgotten. Some of the lighter ones I read too, or he started after I had finished them. One of those was Philip Jose Farmer's Riverworld series. At the time I didn't quite get it, but with the power of the internet I realize that maybe the problem was I started with the second bookThe Fabulous Riverboat, and then gave up in frustration because I wasn't aware of the setup in the first book. I bought the 3rd book, The Dark Design, because it had airships on the cover. That was a selling point to me at the time :-) I didn't get far with that one either. I bought books 1 and 4 with a hope that I'd get around to reading and appreciating them, but no dice. I gave the series to my father and he read the whole thing. I don't know what he thought of it, and just because he finished it didn't imply he liked it. He was a person who didn't give up just because. Awhile ago I thought I'd give the series another try over the summer, reading it in the right order this time! I also bought the Riverworld and Other Stories volume a few weeks back to round out the set.

I've finished To Your Scattered Bodies Go, and have started The Fabulous Riverboat. But, before getting too far into book 2, I thought I'd try a few short stories in the last book.

Me being me, I noted two passages that seemed to show some sort of at least a cursory appreciation of model building. There's this one from early on in book 1 where the reincarnated Sir Richard Francis Burton and Peter Jarius Frigate, who is a fictional stand-in for Philip Jose Farmer, work out the design of a boat to take them up to The River's source:

They were sitting on bamboo stools before Burton's hut. On a little bamboo table in front of them was a model of a boat made from pine and bamboo. It had a double hull across the top of which was a platform with a low railing in the centre. It had a single mast, very tall, with a fore-and-aft rig, a balloon jib sail, and a slightly raised bridge with a wheel. Burton and Frigate had used chert knives and the edge of scissors to carve the model of the catamaran. 

Although all of humankind has been reincarnated along The River, they apparently hadn't met with E. L. Moore, so no balsa :-)

The piece I read next was Farmer's short story, Brass and Gold (or Horse and Zeppelin in Beverly Hills), in book 5 - apparently the mere mention of airships will still attract me to a story :-) Late in the story we meet the protagonist's girlfriend's father, Mr. Goldbeater, who was a Zeppelin pilot in World War I, and is apparently now an avid builder of model Zeppelins:

They found Mr. Goldbeater in the backyard working on a model of his last ship, which had gone down in flames in a raid over England. It was his tour de force model. Thirty feet long, it had four gondolas with gasoline motors that worked and a control gondola in which a small man could fit if he didn't mind a prenatal position.

And Mr. Goldbeater had a house which was crowded with smaller models of Zeppelins and dirigibles.

'Mr. Goldbeater'? Goldbeater's skin was a material used to make gas bags for Zeppelins. Inside jokes aside, it's an interesting story.

Will these model building passages continue to appear as I read on? I'll let you know.

Thursday, June 4, 2020

AHM machine tools

You may recall that Martin and I have been trying to track down the source of machine tools E. L. Moore used in his Uncle Peabody's Machine Shop project. After some intense investigation Martin sent me a page from AHM's 1963 catalogue that shows a set of machine tools in the lower left corner. Maybe they're the ones we're looking for. Or maybe they're the ones E. L. Moore thought were Airfix products that could be bought for the sum of 50 cents F.O. B.? Although, Vince had a different idea, and has been tracking down some machine tools by Alexander Scale Models, although I can't get the Alexander links to work to have a look. Investigations continue.

Wednesday, June 3, 2020

One day billboard

Yesterday I did something I haven't done in a long time: built a model in one day (ok, it was a simple one) :-)

Rooftop billboards were fairly common in Toronto at one time, and the real estate on top of the bank of Nova Scotia building looked like it needed one.

The entire project was freelanced from studying some pictures and then gluing up a structure from various pieces of Evergreen styrene strip along with a small piece of 0.020" styrene sheet for the billboard's main surface.



The advertisement for radio station CFRA was scanned from their 3 May 1971 top 30 leaflet I found stashed away with some old papers, and then sized to fit the billboard. According to their top 30 for that day, Three Dog Night's Joy to the World was number 1, and Chairmen of the Board's Chairman of the Board clocked in at number 30; however, when it comes to model building I usually relate more to their other hit, Give me just a little more time.

Plans

I was fortunate in that the AHM Brewery also included the plans. In the photos the AHM plans are on the right, and those for the Model Power version are on the left. The AHM kit was manufactured by Pola in West Germany, and the kit was simultaneously released by Pola for the European market and AHM for North America. The Pola / AHM plan is wordless so there was no need to create versions in different languages. I assume this was done to keep costs down. The modern day Model Power plans seem overly busy, and I'm not a big fan of instructions that shout at me in ALL-CAPS.