It's not a bird or a plane or Superman, it's the Goodyear blimp! Recently I read that Goodyear put a new blimp into service, Wingfoot Two, and I was reminded of the blimp chasing I did back in the mid-80s.
Although I enjoy model railroading, I've never been much of a serious train chaser, but there was a time when blimp watching was my thing.
This particular landing sequence I shot outside the fence of the old Downsview Airforce Base in Toronto maybe in '85 or '86.
I think that yellow station wagon off to the left is an AMC Eagle.
Nose down, on final approach.
I recall there was a big ground crew that travelled with this ship. That's one of their buses in in the foreground.
Vehicles cleared, everything is ready for a perfect landing.
I don't seem to have any photos of the docking operation, just this one last shot over the gate of the moored blimp.
Monday, April 18, 2016
Friday, April 15, 2016
Fella from up Canada way ...
... write me the other day wanting a list of all the articles I've write [sic] and the issues they appeared in . . . sorry but fat chance of me getting all them together
[from the cover letter to E. L. Moore's Putty Knife Factory article sent to Hal Carstens at Railroad Model Craftsman on 28 Oct '68]
In '68 I was still a wee lad learning his ABCs, so that fella wasn't me - but maybe I'll be inventing a time machine soon :-) While we wait, I've posted an update to the E. L. Moore articles master pdf here.
Hastings "Feed & Seed" squiggle style
In the same folder with the alleged Marmora station, I found this single-sheeter of the Hastings "Feed and Seed" I posted photos of back in 2011. This youthful drawing from the '70s is much cruder than the Marmora station. The proportions are all wrong, but maybe I selectively compressed it :-) Regardless, on the drawing's flip-side I scribbled a lot of calculations - maybe I was trying to figure out how to make a small, buildable model out of this prototype.
Wednesday, April 13, 2016
E. L. Moore and the influence of Bill Schopp
The Molasses Mine and Factory is one of the strangest E. L. Moore projects, and even stranger, it was turned into a plastic kit by AHM. Where did the idea come from? Did he actually spend time in the Bryson City jail as he suggests in the Molasses Mine tall tale? Well, speculation has come to an end, at least for the idea, the jury is still out concerning jail. It was long time Railroad Model Craftsman contributor Bill Schopp, aka The Layout Doctor, who slid a couple of ideas into E. L. Moore’s brain via postcard.
‘Twas through the kind offices of your loyal helper, Bill Schopp, that the idea of a molasses mine was tendered . . . I thought I might as well make the most of it and could be some will actually believe there was such a plant. Every now and then Bill comes through with a postcard and a brainstorm thereon.
In the 3 Oct ’68 cover letter for the Molasses Mine and Factory manuscript, E. L. Moore enlightens Hal Carstens on the mine’s origin.
Turns out Mr. Schopp was also the idea-man behind Garbage Train or The Mudville Flats Extra that appeared in the July ’69 issue of Railroad Model Craftsman.
Worked up Bill Schopp’s idea and got it off the board -- ol’ Cannonball Waste Express, sort of a take-off on the San Francisco’s Excess Express, traction engine with fan propellor to keep stink and flies from engine crew, horse and wagon age when garbage would fatten a hawg when not so much was orders in triplicate, TV dinner trays and Christmas wrappings.
In the 5 Jan ’69 cover letter for the Nova Scotian Lighthouse article that appeared in the Oct ’69 issue of Railroad Model Craftsman, E. L. Moore tells Hal Carstens what he’s been up to and who was responsible.
But, all good things must come to an end.
You’ve gone off the deep end several times of late with garbage train, molasses mine, etc. Let’s turn to more serious stuff: Regret nothing comes to mind.
In a 25 Mar ’69 letter to E. L. Moore, Hal Carstens, implores him to get serious, but seems not to have a suggestion for how to do that.
Apparently a mark of getting serious again is the construction of a car repair shed.
You easing a hint I should return to sanity and leave off fantasy? Relly [sic], I’m just going the pace the world is setting, and if they’s anything sane about it then I’m cockeyed. Y’all figure maybe a car repair shed is sane enough -- building one for a friend at the moment.
In a friendly update letter to Hal Carstens, dated 2 Apr ’69, E. L. Moore reflects philosophical on the nature of sanity in relation to the modern world. The odd Molasses Mine now and then is pretty tame stuff all things considered.
The car repair shed did see the light of day in the obviously titled Car Repair Shed in the Nov ’69 issue of Railroad Model Craftsman. Here’s the accompanying cover letter.
16th of April 1969
Ye honorable Editor
RMC Ramsey, N. J.
Here’s a train shed I made for a friend . . . . maybe you can use it. Only half phantasy -- I remodeled somebody’s model into something else again.
If ‘n’ when I find something I can use as a starting point I’ll make up train shed with big brass cubicle above but first I gotta find something authentic as a starter -- the egg, that is . . . . I’ll add the feathers and wings.
Gonna start that youngun on N gauge shortly? He’s about that big -- big enough to be a wrecker.
signed E. L. Moore
E. L. Moore
525 Oakland Ave., Apt 3
Charlotte, N. C.
“... train shed with big brass cubicle above...”? Darned if I know what he’s talking about. Maybe it’s a joke I don’t get. Wouldn’t be the first time. Maybe there’s a Bill Schopp postcard out there that explains everything :-)
Labels:
Bill Schopp,
E L Moore Files,
E L Moore Kits,
Molasses Mine
Friday, April 8, 2016
E. L. Moore’s Spumoni Club Coach: Body and soul and cheese
There is no use pussyfooting in this matter. Do we or don’t we wish to wade into a passenger-car? We do? All right, let’s start. If we use home materials, the least we can do is to squander some time. If the result of our labors should not be satisfactory, we always have the trash can.
[Raymond Yates kicks readers in the metaphorical butt regarding passenger car construction on page 273 of his 1939 opus, Making & Operating Model Railroads]
The sides are 8 3/4' high by 20' long, and the ends are 8 3/4' high by 8' wide (presuming you're using 8' wide flooring).
At this point I thought it a good idea to make a drawing of a side and end to better understand the sizes of things. I laid out the drawing in 1/4" scale so I wouldn't have to fiddle with a tiny picture. The drawing's rough, but accurate - it's for working, not showing. You could do this on a computer, but I understand things better when I draw them with a pencil.
Since there are quite a few windows it would be wise to take the precaution of cementing a piece of thin stripwood above and below the window areas to prevent splitting while cutting out the openings (see Photograph A, inside of coach [this photo is missing]). At the same time another piece of stripwood should be cemented all around just 1' from the bottom edge for purpose of providing a ledge, simplifying matters when you come to assembling ends and sides around the floor.
I didn't do that prep work, but cut directly into the basswood without problem. Later, I did install an interior ledge so that the body fit properly on the the floor.
For the coach walls I used 1/16" basswood HO scale clapboard siding. An odd choice I realize, but I had a sheet - from the Mt. Albert Scale Lumber Co. - in my scrap box. The inscribed angling wasn't all that pronounced, so I decided to use what I had on hand inside of buying new material. E. L. Moore used 1/16" corrugated basswood sheet with the corrugations sanded down, so he too likely made do with what he had lying around. So, at least the 'made-do' ethos was preserved :-) Using the plan I drew the side in reverse on the sheet back.
The window openings are 2' x 3' except one which corresponds to the door and is 3' x 3' and the end windows are also 3' x 3'.
I used a brand-new #11 Xacto knife blade to cut out the openings, and used a new blade on each side.
Then the side was cut free from the sheet. At this point the openings are still a bit rough and need to be cleaned up a little with sanding sticks and files. After all this work, and staring at that ribbed paneling for so long, I was reminded of my sandwich grill and had worked up an appetite :-)
My favourite sandwich is a grilled cheese. Luckily, Debra had read my mind and had bought some aged cheddar, so we were ready to go.
Here's what you'll need ingredients-wise,
Yeap, it does! Once the trim was installed on the long sides, I glued the 4 walls onto the floor. I trimmed the end walls once everything was dry. For some reason I thought I wouldn't get the trim on the end walls to line up properly with the side wall trim if I trimmed the end walls prior to assembly.
Well, it was a little awkward to apply trim strips to the ends after assembly, but it wasn't too hard and I got the alignment I was looking for. Digital photos are unforgiving, I see a few areas that need some touchup painting :-( Gotta go clean up the grill - until next time.
Here's what you'll need ingredients-wise,
5 year old aged cheddar - Debra picked some organic stuff
Oatmeal bread
Honey mustard
6 slices of double-smoked bacon - if you're in Eastern Ontario, I recommend the stuff from Roadapple Ranch
Honey mustard
Olive oil
Once you've gathered that up, let's move on to assembly.
1. If you can convince your significant other to fry up the bacon while you prepare the sandwiches that would be most excellent, otherwise you need to get frying.
2. Brush olive oil on the outside surfaces of the bread. This is so the sandwich doesn't stick to the grill.
3. Shred enough cheese to make a significant pile as shown in the photo.
4. Spread the honey mustard on the bread's inside surface and then pile on the shredded cheese.
5. When the bacon is done, drain off the excess grease, cut into bite-size pieces and then stack equal amounts on both sandwiches.
Once the grill is hot, stick the sandwiches in and grill until they're golden brown and the cheese is melty. The aged cheddar will look a bit curdled when done, but everything will taste just fine.
Get some plates; you're done! These sandwiches have intense flavour, so If you want something a little milder, as we did the next day, use a 50/50 mixture of a medium cheddar and mozzarella instead of the 5 year old aged stuff.
After sleeping off lunch for awhile, it was back to work. The coach wall openings were cleaned up with sanding sticks and files. The pieces were then painted with Tamiya acrylic XF-76, Gray Green (IJN).
Each opening is then fitted with an inner sash of 1/32" square stripwood cemented in so as to be flush with the inside surface. Then, after painting, a single strip of acetate will serve for the row of openings.
Instead of Mr. Moore's recommendation, I glued in some 1/32" balsa sheet to the inside of each wall. You can see that a ledge is provided for the wall to rest on the floor. These inner panels also act to form a recess for some clear strip to be used as window glazing.
The door isn't cut all the way through. The wood was shaved down to a smooth surface and a simulated door worked in with pencil and knife. It's the type of door which might have been salvaged from a bus, opening as it does, in the middle.
I did go ahead and cut the door all the way through. I'll make up a separate door and install it when I get around to adding the windows.
Six inch wide trim (1/32 x 1/16" for HO) sanded down to a more refined thinness, is added to the sides and ends as shown. One piece of 1/32 x 1/16" stripwood forms a window ledge all around.
For trim, I used Mt. Albert Scale Lumber Co.'s 2x4 scale lumber strips I had in my scrap box. Trim pieces were painted with Tamiya acrylic XF-4 Yellow Green prior to installation. I thought it would be tedious gluing all that trim into place, but it was a surprisingly pleasant activity. I think it was because the sides seemed to come to life as each piece was added.
When assembled around the 8' x 19' floor, it should present a coach with a finished body size of 9' x 20'.Yeap, it does! Once the trim was installed on the long sides, I glued the 4 walls onto the floor. I trimmed the end walls once everything was dry. For some reason I thought I wouldn't get the trim on the end walls to line up properly with the side wall trim if I trimmed the end walls prior to assembly.
Well, it was a little awkward to apply trim strips to the ends after assembly, but it wasn't too hard and I got the alignment I was looking for. Digital photos are unforgiving, I see a few areas that need some touchup painting :-( Gotta go clean up the grill - until next time.
Probably there is a moral side to this car building. Many beginners are afraid to tackle the job of making a car of any kind, feeling that it is quite beyond their skill. This is a rather cowardly attitude. Perhaps our first work will not merit a blue ribbon, but what of it? As we move along, we shall gain in experience and, if we are made of the right stuff, we shall eventually reach a point of perfection that will permit us to fashion cars of all sorts with really delightful results. It costs little to nothing to try our hand at it. We don’t need to buy our scale trucks or couplers unless the body of the car merits such attention when it is finished.
[Raymond Yates revels the secret that all experienced model builders know: keep building, don’t give up on page 278 of Making & Operating Model Railroads]
Subscribe to:
Posts (Atom)




























