Thursday, April 7, 2016

E. L. Moore: The almost household name in N-scale model railroading

Little did I realize when I posted that tongue-in-cheek cover I cooked up for a non-existent ‘70s paperback on N-scale model railroading by E. L. Moore that I wasn’t too far off. It turns out that in September ’68, Mr. David P. Morgan of Kalmbach Publishing wrote to E. L. Moore and asked if he’d consider writing an N scale primer for them. Mr. Moore declined and the rest is non-history. 

September 10, 1968

Mr. E. L. Moore
525 Oakland Ave., Apt. 3
Charlotte, North Carolina

We have a publishing proposal for you, Mr. Moore, and it is this: Are you in a position to author a beginner’s N scale model railroad book for Kalmbach of approximately the same size and format as the enclosed HO RAILROAD THAT GROWS and HO PRIMER, with delivery by May 31, 1969?

In our view, the expanding N scale market will inevitably introduce many newcomers to model railroading; and therefore it recommends itself to a soft-cover book exclusively devoted to the subject. Such a volume would not only introduce the novice to the pecularities [sic] of N scale itself but also the wider world of model railroading, per se -- just as the above-mentioned and enclosed HO books have done. Now, we cannot presently afford staff personnel for such an assignment. In our search for a free-lance author, your name was recommended by Andy Anderson, who purchased a considerable amount of copy from you during his MODEL TRAINS editorship days. Andy believes that your readable, step-by-step style would be what we need to communicate model railroading and N scale to the rank beginner -- not to mention your other qualifications in the field of photography and other illustrations.

If this is a project which would interest you, please write me at your earliest convenience. A self-addressed stamped envelop is enclosed.

Cordially,
signed David P. Morgan
Books Publisher

David P. Morgan/s1
enclosure.
[This book never existed, but I couldn't resist slapping a cover together!]

Sept 13, 1968

Mr. David P. Morgan,
Kalmbach Publishing Company,
1027 N. Seventh Street,
Milwaukee, Wisconsin.

Thanks for the opportunity to author a beginner’s N scale railroad book as outlined in your September 10th letter; but after looking over the HO Primer I don’t really feel that I qualify for the task. I have a woeful lack of electrical knowledge, and this as you know comprises a large share of any discussion on trains in general.

My forte is building models and scenery. Andy Anderson apparently forgets that he once asked me to do an article on elementary electricity for beginners, and I had to refuse him on the same grounds. Recently, I completed a small N scale railroad at Carsten’s suggestion and which will presently come out in RMC, but while the wiring on this was elementary, nothing complicated, and much the same as I had done on a previous HO pike, I still had to consult a primer on wiring to refresh what little knowledge I possessed.

Another thing: I like doing just what I feel like doing, and just when I feel like doing it. I abhor assignments, guidelines, schedules and deadlines. So I generally work as I damn well please and on what, within my limitations, I feel I can do well.

So thanks again for the offer, but I suggest you look for a better qualified author . . . and nowhere within the range of my acquaintances can I think of one I could recommend.

Cordially,
signed E L Moore

E. L. Moore
525 Oakland Ave., Apt 3
Charlotte, N. C.

The N scale railroad he’s referring to is his Enskale and Hoentee that appeared as a 3-part construction article in the October, November and December ’68 issues of Railroad Model Craftsman. It was a little, 30” x 30” layout that incorporated N, HOn2 1/2 and TT scales. Also, it was a beginner layout, but an unusual one that had E. L. Moore’s unique style all over it. It was not in the mold of the more generic material found in HO Primer or HO Railroad that Grows. The Enskale and Hoentee had a straightforward, uncomplicated trackplan, but for Mr. Moore, it was a little tricky to wire. So, building a model railroad that simulated typical railroad business, which is a common layout configuration, would be troublesome for him. The Enskale and Hoentee was for meant for simple, pleasant fun.

But, imagine if E. L. Moore had built on his Enskale and Hoentee experience and had been given free reign by either Kalmbach or Carstens to build a beginner’s N scale layout for book publication. Not something generic, but full of what made E. L. Moore, E. L. Moore. Consider this: Mr. Moore submitted the Enskale and Hoentee manuscript to RMC on 28 April 1968, and then on 23 May 1968, sent this follow-up to Hal Carstens (months before he was sent the offer by Kalmbach),

May 23, 1968

H. H. Carstens, Editor,
Railroad Model Craftsman,
Ramsey, N. J.

A little hind sight tells me I should have broadened the scope of that train article -- I should have challenged readers to build a size with a track plan that suited them, using the techniques and construction methods described.

You could even have Bill Schopp show a few track variations, in say 30” x 40” or maybe 36” x 48” but still retaining some of the scenic features of the pike I built. Holding rigidly to the 30” by 30” size will limit interest.

Enjoying loafing and reading.
signed E L Moore

E. L. Moore
525 Oakland Ave., Apt 3
Charlotte, N. C.

Denis Dunning tells me he saw you gadding about recently.

Possibly some incentive might be offered readers for most interesting N scale track plan (including scenery) within limit of, say 36” x 48”  . . . . . 

An E. L. Moore, Bill Schopp collaboration might have been interesting, and maybe even highly influential. We’ll never know. Mr. Schopp, aka The Layout Doctor, was a master of all things layout oriented, and even planted the seed of the idea with Mr. Moore for the rather off-the-wall projects that eventually became the Molasses Mine and A Garbage Train or...the Mudville Flats Extra, so they were simpatico on some level (more on this in a future post). 

It turned out that the Enskale and Hoentee was quite popular. In a letter E. L. Moore wrote to Hal Carstens on 28 October 1968, he mentions that it was a draw at the North Hills Hobby Shop in Raleigh, North Carolina,

Enskale thing makes a nice showing -- hobby dealer up Raleigh way (Jim Collier) has it on display as I probably told you before. Kinda cashing in on it ....

Later, in another letter to Hal Carstens dated 28 November 1968, Mr. Moore notes,

The little N-scale road is past history now, but I hope it did you some good and stirred a little interest up . . .  it was fun building it but allee samee I’m glad it was small and not a major project. On account of I like more leisure and less work ... 

So, maybe even with a collaborator, the definitive E. L. Moore spin on N-scale model railroading would not have come to pass - well, one that required a lot of work would not have come to pass :-) 

Tuesday, April 5, 2016

Mt. Lowe observatory gets wings

The next step was to add the left and right wings to the telescope room.
I started with the one on the right. To begin, I used the telescope room as an anchor from which to draw the wing's floor plan in N-scale using dimensions from the drawing. Once the floor plan was finished, I used its dimensions to draw the wing's walls onto a single strip for folding into the final shape.
After the wall strip was cut out, the wall corners were scored and folded into shape. In this picture you can see that I've also cut the floor from a piece of 1/16" balsa and used it for some test fitting before gluing everything together.
A balsa ledge was glued to the bottom perimeter to support the floor and thin paper tabs were glued to the inside of the wall strip to use as a glue strip for holding the wing to the telescope room. Those tabs were trimmed to size before attaching the wing to the room.
It's a little misshapen before the floor is squeezed into place. Keen-eyed viewers will notice that I've glued the wing onto the wrong sections of the telescope room :-( Once I clued in, I carefully sliced it off, cleaned the residue off the telescope room, and then glued it to the correct section. 
The wing shapes up nicely once the floor's in there. White glue holds everything together.
The other wing is assembled the same way. Once the wings were in place, all of the inside walls were panelled with 1/32" balsa. This helps to significantly stiffen the structure and will make for a nice interior since the roofs will be removable. Again, the eagle-eyed will notice that I've cut another door in the telescope room wall that leads into the left-wing - I had mis-located the original connecting door. The left-wing's internal partition is made from a piece of 1/16" balsa.
After the interior work was done, all the windows and doors were framed with strip basswood I had in my scrap box. I used the smallest and thinnest material I had on hand as I didn't want to buy anything, but you'll note that it's a little oversize for N-scale.

Sunday, April 3, 2016

When Canadian Pacific had wings

From 1942 to 1987, Canadian Pacific also ran an airline. I came across this snapshot in a box of my grandmother's photos of what I think is a DC-8 in an old Canadian Pacific paint scheme. I think this was taken at Toronto's Pearson airport in the days when it was still known as Malton Airport. The date this was shot is unknown, but it was likely sometime between 1961 when Canadian Pacific started to acquire DC-8s, and 1968 when they changed their name to CP Air and adopted the orange paint scheme.

Saturday, April 2, 2016

Kim & Jim


I was surprised that I didn't know about this 2014 video about Kim Adams and his work. I was glad to to have stumbled across it a little while ago. Turned out that bit of browsing also turned up this HO scale video wonder by Jimmy Cauty.

Wednesday, March 30, 2016

E. L. Moore's Spumoni Club Coach: Lunch, ruler and wheels

E. L. Moore was best known for his HO scale model buildings; however, he did publish a small number of articles about making HO scale rolling stock [1],

with the Spumoni family in Merrie Old England; Railroad Model Craftsman, January 1956 (photos of E. L. Moore’s Rowland Emmett style rolling stock)
Photo in Stop, look and listen of E and K train where 6 of the 7 cars are scratch-built; Model Trains, January 1959
Old-Time Log Buggies; Model Trains, March 1960
Snowplow in an Evening; Model Trains, January 1961
Slim gauge carriage; Railroad Model Craftsman, September 1961
Open-air excursion coach; Model Trains, Fall 1961
The little red caboose; Model Trains, December 1961
Central Pacific snowplow; Model Trains, January 1962
A new look for the Old General; Model Trains, March 1962
Six-Ton Jimmy; Model Railroader, May 1967 (manuscript written in 1963)
An Easy Narrow Gauge Coach; Railroad Model Craftsman, March 1969 [2]

While reading through E. L. Moore’s files I came across an unpublished rolling stock manuscript called Spumoni Club Coach written in 1963 [3]. I’ve never built rolling stock before, so I thought I’d give it a try with this project. 

The notes on the manuscript indicate there were 3 accompanying photos and a sheet of drawings. The only photo I came across was the opening beauty shot. The other photos and drawing are missing. I found the text a little hard to follow without the other photos - one was probably a photo of all the parts prior to assembly laid out in kit form - and the drawing, so I’m going to intersperse my own notes, photos and drawings throughout his manuscript to aid the explanation. E. L. Moore’s manuscript is in Courier, and my notes are Arial. Here we go.

SPUMONI CLUB COACH
BY 
E. L. Moore

I'll admit Spumoni Club Special sounds a lot like a three decker sandwich. Fact is, back in the days when Ma Spumoni presided over the Red Eye Saloon [4], she did put out just such a sandwich. Pork, beef and chicken, with pickle, all for 15 cents. But them days are gone forever.

Hold on a minute. I can’t think of a better way to start a new project than with lunch. Debra and I discussed that sandwich at length, and being the master chef she is, as well as head-honcho here at the 30 Squares media empire, she came up with an excellent spin on the classic club sandwich a la E. L. Moore’s triple decker memory. I hand this part of the post over to her to explain how to make your own incredibly delicious 2016 Spumoni Club Special Sandwich.
2016 Spumoni Club Special Sandwich
A new twist on an American classic

Makes two generous sandwiches (one for you and one for someone you really like)

Ingredients:
6 slices of Premiere Moisson Country Style Round Loaf Bread, toasted (Baked in Quebec with no artificial anything. Sold at Farm Boy in eastern Ontario).
6 slices of nitrate-free, Double-Smoke Bacon, pan-fried (Drug-free meats from Roadapple Ranch, Finch, Ontario. Tell Mike that Debra sent you).

100g of nitrate-free, thinly sliced chicken.

100g of Farm Boy, AAA Beef deli meat, sliced thin (roasted in the Farm Boy kitchen, no nitrates, no additives of any kind).

Your favorite mayonnaise.

1 thinly sliced, ripe tomato and romaine lettuce, preferably both organic.
1. Each sandwich uses 3 slices of bread. One slice of bread acts as the divider between the two layers of the sandwich. One layer has chicken, bacon, lettuce and tomato. The other layer has beef, bacon, lettuce, and tomato. Spread mayonnaise thinly on each internal side of the bread slices.  

2.  Serve with a pickle. It is also especially good with a pile of Red Apron sliced Bread and Butter Pickles .  You long-time readers know Red Apron from previous posts in this blog.  If you don't like pickles, it's also great with Broccoli Slaw.

My recommendation is that you stop at this point, make some sandwiches, enjoy lunch with someone close, come back in an hour or two and we’ll get started. Google willing, I’ll still be here when you return :-)
The Club Coach was really the old man’s idea -- Pa Spumoni’s. He wanted a mobile retreat where the boys could get together for a little friendly game and some celebrating now and again. The middle of Skunk Hollow Trestle seemed the ideal spot, but apparently Ma set Pistachio, Jr on their trail and dogged them down.
["The private car of the "Cirrhosis Club" of the Grasse River Railroad in upper New York State picks up the happy lumber workers and returns them to camp after the saloons close on Saturday nights. C. M. Clegg photograph." As E. L. Moore notes, this photo appears on page 298 of Lucius Beebe's Mixed Train Daily, published by Howell-North in 1947 - I have the 1961 edition.]

Now if you think this coach is a modeler’s wild dream, then just you take a gander at page 298 of MIXED TRAIN DAILY. However, the interior of Pa Spumoni’s coach is probably a bit more sumptious [sic] than that of the Grasse River club car.

When I read that paragraph I went straight to my bookshelf and opened up the copy of Mixed Train Daily Debra gave me for my last birthday, and lo and behold, there it was. You'll notice that the window height to skirting proportions on the car are a little different on the prototype and they result in larger windows. 

Photograph (A) [this photo is missing] pretty well shows the necessary parts of the coach ready for assembling. The only commercial parts used are a T-25 Central Valley old time passenger truck with an 8’ wheelbase, and one from a set Selley’s #335 work car steps. Any truck with a similar length wheelbase will do.

I'm still looking for work car steps - maybe I'll make my own from styrene - but a friend of mine gave me an HO scale passenger car truck in response to my whining that I had no such thing in my scrap box on the condition that I not mention his name in the post. Thank-you Mr. X!
It's not an old time passenger truck, it's Italian made, from a larger, more modern passenger car and probably dates from the '70s or '80s. It's 8'-6" between wheel centres, so its size is close. Besides, I spent all my money on sandwiches, so I can't look a free truck in the couplers :-) I decided to make a few repairs on this piece and go with it. 
I removed the built-in coupler and returned it to Mr. X. I then replaced the wheel sets with some 30" diameter Walthers wheels. They have much smaller flanges and turn more freely than the originals. The side frames were a little splayed, so I glued in some styrene pieces to square things up.
Some styrene shims were glued on top to provide a level surface for the car body. Once all these styrene pieces were glued on, the mounting hole was drilled into the truck centre. The original hole was off-centre, so it had to be relocated anyway.

A few scraps of balsa, about five inches of 1/16” thick commercial sheathing, and you’re in business. Instead of regular sheathing I sanded down some 1/16” corrugated wood roofing to get the effect of very narrow sheathing (I had hoped!) 

I still need to settle on what I'm going to use to build the sides. 

And then, of course the floor, a piece 1’ thick by 8’ by 19’ long. A slice from a souvenir or advertising yardstick makes ideal flooring. The roof is removable and fits down over the sides.
Turns out I do have a few old yard sticks they used to give away in hardware and paint stores, and had a broken piece so I didn't need to contemplate ruining some relic. 
I cut a 19' section from the yardstick to use as the floor. It turns out the floor thickness scales to 1'-3" instead of the 1' E. L. Moore specifies, so I'll need to make some adjustments to the side walls. The good news is the width does indeed match the 8' spec. 

Beginning with the floor, center the truck and fasten it on with a screw, then lay it aside and tackle the sides and ends.
I painted the floor bottom flat black and the top green. That isn't the screw protruding into the floor, but a wood chip left over from the pilot hole that I later cleaned away.

That's it for now. Join me again for lunch and some coach body construction!

Digressions

[1] The Spumoni Club Coach is in the lineage of Slim gauge carriage, Open-air excursion coach, and An Easy Narrow Gauge Coach: easy going passenger equipment. I get the impression from these builds that they aren’t so much for getting from one place to another, but for just getting away. Getting away from it all. Freelanced and free-and-easy. Escape is the prototype.

[2] If you've read E. L. Moore's An Easy Narrow Gauge Coach that was published in the March 1969 issue of Railroad Model Craftsman you'll note that that coach is a narrow gauge variation on the Spumoni Club Coach. Mr. Moore converted an AHM N-scale mine car to an HOn2 1/2 coach. And, hold onto your hats: he notes in the article this was his first project that made use of styrene! Yes, a project predominately of styrene. He stated that since the car being converted was styrene, it made sense to use it for the modifications. He also seems to be a relatively sophisticated styrene builder at that, recommending to the reader to use a liquid cement - Testor's liquid was his choice - instead of the tube stuff.

[3] I’ve also come across another unpublished rolling stock project called Alaska Railroad Cement Mixing Car that was written in 1969. It seems to have 2 sheets of drawings, and between 3 and 6 photographs accompanying the manuscript, but they appear to be lost. As Mr. Moore states in the manuscript’s opening paragraph, “It is nothing more than a cement mixing machine mounted on the end of a flatcar, with a few conveniences built around it extemporaneuous manner." His prototype was a photograph by “John (The Beard) Henderson” sent to him by “a friendly critic up Alaska way.”

[4] Construction of Ma Spumoni’s Red Eye Saloon was presented in Civic center for Boomtown in the March ’63 issue of Model Railroader. Apparently as well as those 15 cent triple-decker sandwiches, “... a 5-cent beer entitled you to a free lunch and the atmosphere was hazy with the smoke of good 5-cent cigars. This was when sumptuous 25-cent dinners were cooked on wood-fed stoves and dinner buckets were packed to capacity....”.