Monday, September 15, 2025

Is this the ultimate DHC-2 Beaver?

"World's best example of a DHC-2"

Whenever I'm around airplanes I'm on the lookout for de Havilland of Canada DHC-2 Beavers. If you're a longtime reader here you know it was the floatplane of choice on the Loonar Module layout.

The outline of a DHC-2 provocatively enticing me from the shadows :-)

I was at the Gatineau airshow over the weekend, and as I was wandering around the static displays before the show got started I happened to spy what looked like the vague outline of a DHC-2 in a distant hangar.  

So clean the chrome was blinding!

I was not disappointed. Venturing into the hanger I was greeted by this fine specimen. It's the most pristine one I've ever seen. The volunteer who was on hand to answer questions said it was the best example of a DHC-2 in the world! After giving it as close a look as I could from behind the black tape I'd tend to agree with her. I don't know who built or refurbished this airplane, but they did a great job.


A bit later in my wanderings I saw this fine example of a Cessna Skywagon floatplane. An excellent airplane; however, for purely sentimental reasons the DHC-2 remains my favourite.


Overall it was a great show with great weather and great airplanes. I hope to return next year.

Friday, September 12, 2025

A brief stop at La Pulperie de Chicoutimi Regional Museum

Parked out front of La Pulperie de Chicoutimi Regional Museum

We were recently touring the Saguenay-Lac-Saint-Jean region of Québec and made a brief stop at the site of Chicoutimi's famous pulp mill, which is now the site of La Pulperie de Chicoutimi Regional Museum.

It appears to be a standard gauge loco

I was quite excited when I saw this three-quarter view of the loco from the distant parking lot. I couldn't clearly see the loco's backend from there, and thought maybe this was an example of one of the machines that was the basis of the Minitrains loco that E. L. Moore used on his layout. But no. 

Built in 1923 by the Montreal Locomotive Works according to the front plate

However, it's a fine loco in its on right. The plate on the front says it was built in 1923 by the Montreal Locomotive Works. I don't know much about locomotives, so here's a link I found that has something to say about this one.

The museum, with the loco to the left.

The museum is housed in this beautifully restored stone engine facility. The interior is just as magnificent as the exterior; however, I've no photos to show of the inside as we were on a tight schedule and didn't have time to properly tour the facility and exhibits - that's on the list for a future visit!

Friday, August 29, 2025

A visit to the Kawartha Lakes Museum & Archives to see the John McCrea Model Collection

Two examples of John McCrea's work. Left: Pioneer Shanty | Right: Pioneer Squared Log House

If you're a long time reader here you may recall that I'm interested in folk artists of the past who've made their art building miniature buildings. A few of them worked in model railroading, like E. L. Moore, others went in different directions in accordance with their own natures. You can find all my posts, along with this one, on the subject under the 'Folk Roots' tag.

I've been looking into Ontario folk art buildings artists and stumbled across the work of a gentleman named John McCrea, whose models are archived and on display at the Kawartha Lakes Museum & Archives in Lindsay, Ontario.

Apparently the scale of McCrea's large models is 1/2" = 1'

I've been meaning to get out to the museum for awhile and this week I had my chance.

In a nutshell, John McCrea was born on 16 April 1865 in Omemee, Ontario, and died on 19 April 1957 in Toronto. Recall that E. L. Moore was born on 14 March 1898, so McCrea was of an earlier generation, but both Moore and McCrea were born into rural life: Moore to farming, and McCrea to cabinet making, a skill which he apparently learned from his father as a child.

There's an interesting biography of McCrea here, but one thing I will note is that he didn't start building the models in the collection until 1935 when he was 70, and continued until is death in 1957 when he was 92.

The collection consists of models he made of the buildings, structures, and accoutrements of pioneer life in Ontario. I asked one of the staff - who turned out to be the managing director - if she knew why McCrea built these models? Was there some ulterior motive like building up a collection for a public display? She said there didn't appear to be any. He simply wanted to capture the physical reality of the objects that comprised Ontario pioneer life. E. L. Moore had much the same attitude for a lot of his work: he wanted to capture his early life in model form for his daughter. 

Before I go much further I should note that the museum's managing director, Barbara Doyle, generously answered all my crazy questions and provided lots of great background information I hadn't considered. She and the gentleman at the front desk - whose name I unfortunately can't remember :-( - were very friendly, enthusiastic, and knowledgeable and made our brief visit quite enjoyable.

I believe the scale of this model is the same as the house

McCrea was a fine craftsman. As an example, take a look in the photo below at these models of farm implements he made in 1952, especially the blade and teeth on the cross cut saw.

Some modelled farm implements

Although there were only two model buildings on display I'm told the collection is quite large and numbers in the hundreds of items. As well as being large in number the models are also large in size: they're built in scales ranging from 1" = 1' to 1/2" = 1' to the smallest ones being 1/4" = 1'. Different models are rotated in and out of the museum display as different thematic presentations are created. When you visit you may see different models than I've shown here; however, whatever is there you'll no doubt get a good sense of McCrea's high level of craftsmanship.


If you want to see more of these fine models there's a booklet you can buy called History in Wood: The John McCrea Collection. Once I've studied the book a bit I'll probably follow up with a post on tools, materials, scale, and other such model making related things. 

Before I wrap up I should mention that there's much more in the museum than this one collection, and lastly mention the museum building is a repurposed 19th century jail that performed said function from 1863 to as recently as 2003 (!).


So, if you ever find yourself in or around Lindsay, drop by and have a look.

Thursday, August 28, 2025

A little more on the Peter-Austin Building Set Mystery

Left: Set# 502 (purchased 2021) | Right: Set# 500 (purchased 2025)

If you're a long time reader here you may recall that back in the fall of 2021 I did a few posts on a building construction toy manufactured in the early 1960s by Toronto's Peter-Austin company. It's a toy that seems almost identical to the famous Girder and Panel toy manufactured by Kenner in that era.

What got me started on those posts was a paragraph in a book called Architecture on the Carpet: The Curious Tale of Construction Toys and the Genesis of Modern Buildings by Brenda and Robert Vale. The authors assert the Kenner toy "appears to be a commercial rip-off" of the one by Peter-Austin. Here's the complete paragraph so you can see for yourself*:

"It was not until 1956 that a toy appeared that imitated the construction of modern tall buildings, with a frame cladding. The manufacturer was the Peter-Austin Manufacturing Co. of Toronto, Canada. They made two different sets, the No. 500 Trans-Canada Highway Bridge set and the No. 510 Building Set. These sets comprised columns and girders made of rigid red polystyrene.11 The columns were pushed into a baseboard of Masonite (hardboard) with holes to receive them, and they were then connected with the horizontal girders to form a building frame of any desired height, which could then be clad with lightweight panels of thin, vacuum-formed plastic, the simplicity of the system allows for a variety of building forms. A year later, in 1957, Kenner Products of Cincinnati, Ohio produced a more or less exact copy of the Canadian sets under the names 'Girder and Panel' and 'Bridge and Turnpike' in what appears to be a commercial rip-off. Certainly pictures of both systems show remarkable similarities. As might be expected, the Wikipedia entry for Girder and Panel does not have the full story.12 It describes how it was invented by the president of Kenner, Albert Steiner, after he saw a new building being constructed in Cincinnati, but this appears to be contradicted by the pictures of the Canadian sets, which predate the Kenner product.13"

As a child I owned a Kenner Girder and Panel set and loved that toy. So, being born and raised in Toronto, I was quite surprised by the authors’ assertion that the toy was actually something invented and manufactured in my home town and possibly 'misappropriated' by Kenner. That seemed a surprising thing to say so I did a little digging to see if I could confirm or deny their assertion, the result being the posts. If you're interested in my 'investigation' from a few years back all the posts in the series, including this one, are tagged with 'Peter Austin Mfg Co'.

Investigations hit a dead end around late November 2021 with the mystery unresolved and no definitive answer in sight. However, after Vince stumbled across a Kenner set at a Toronto thrift shop earlier this summer the investigation was briefly rekindled. 

Here's the side of Set# 500: Was the original selling price $1.98CDN?

Back in 2021 I was able to buy a beat-up Trans Canada Highway Bridge Set (Set# 502 as it turns out). It had only a few parts inside, no instructions or associated advertising material, and the box was in very rough condition. This summer another bridge set for sale on eBay was brought to my attention. It looked to be in very good condition so I went ahead and bought it. I was pleased to find it was in nearly pristine condition with a near perfect box, a complete set of parts, and instructions. 

But that wasn't the most surprising thing.

I didn't expect the box to be much smaller than the one I had and have a different, and smaller, product number: 500 on this new one and 502 on the one I first bought. So, it appears there were at least two boxings of this toy. I'll assume 500 was released before 502, so given 502 is in a bigger box, did 502 contain more parts? Was the bigger box just a ploy to make it seem like there was more inside? When did 500 and 502 appear on store shelves? 

You might think the questions end there, but no, there're more.

Instruction sheet found in Set# 500. Reverse side is French version.

Above is the instruction sheet included with 500. It looks good.

Cover page of project booklet from Set# 500. Arrows I've added to point out Kenner-ness.

However, things start to look a little odd once we have a look at 500's project booklet that shows a few of the bridges you can build. Its cover page tells the tale: it looks like the components used to build the bridges shown in the booklet are made from Kenner components! Inside is no different. All the projects appear to have been built from Kenner parts. 

The giveaway is the crown-like connector used on the vertical pieces (I've noted them with red arrows in the above photo of the cover page). Those crowns are what Kenner used for its connection technology. Peter-Austin used a lug and loop system. You can see the difference in this comparison photo of the two products that I showed in this post.

So what's up with this? It appears that drawings of Peter-Austin parts are used to illustrate the instruction sheet, and photos of completed bridge projects built with Kenner-looking parts are used to illustrate the project booklet.

Now, as they say on tv: "But wait, there's more!"

Page 1 from project booklet, Set# 500.

Ok, so let's look at the pages in the project booklet. It's just a folded sheet of paper, so this won't take long as 'booklet' is an exaggeration on my part.

Page 2 from project booklet, Set #500.

We're already at page 2 with just one more to go.

Page 3 from project booklet, Set# 500.

At the top of each page you can see a set number called out. The implication being that there are 3 bridge sets, each with more parts allowing the construction of more complex structures. Or maybe they are just expansion sets that build on previous ones? I can't say for certain.

Questions, questions, questions. They seem never ending in this dig.

Is Set# 500 the same as Set No. 1 referred to in the project booklet? Is Set# 502 the same as the project booklet's Set No. 2, or maybe Set No. 3 (implying that 502 had a bigger box because it had more parts as I alluded to earlier?)? Were any of the sets implied by the project booklet ever produced? Again, I have no answers, just more questions for the greater mystery.

It seems the story behind this toy is more complicated than I thought. If anything more turns up you'll be the first to know, so stay tuned :-)

---

Digressions

*The Vales include 3 notes in this paragraph: marked with the superscripts 11, 12, and 13. 

11 says: "All information from http://www.girderpanel.com (viewed 18 November 2011)", and 13 says: "1956 Trans Canada Bridge and Pam 'n' Andy Structural Building Sets manufactured by Peter-Austin Manufacturing Co., Toronto Ontario Canada described at http://www.girderpanel.com."

girderpanel.com no longer seems to be active, but a search of the Wayback Machine turns up snapshots for the site from 2011. The Wayback link to the Peter-Austin building sets is here, but below is a small snapshot of what I believe is the page in question:

Yes, it's basically unreadable so go to the link instead.

Yes, the site does state the Peter-Austin kits were released in 1956, but frankly, I can't find documentation to support that date. So far I'm thinking that the Peter-Austin sets appeared later, maybe 1961 or 1962, but I don't have a solid document trail for those dates either.

The same page in the Wayback Machine shows entries for the Kenner sets and the entries state an initial release date of 1957; hence, the Vale's assertion.

I had a look at entries for later years and they don't appear to have changed up until the site disappeared.

Note 12 says to refer to the wikipedia entry for the Kenner sets. Here's the link. You can see there's still no mention of the Peter-Austin product.

It might be needless to say, but I'll say it anyway, there're a lot of contradictory factoids circulating about these products, and they don't stitch into a coherent story. Given the dates associated with these products the true story may never arise; however, I'm glad I stumbled across that paragraph in the Vale's book as I probably would have never heard of the Peter-Austin building toy and I'm glad they introduced me to it.

Wednesday, August 20, 2025

Power for the Mountain


I've had the parts for the power controller kicking around the workshop for awhile. Being the last piece of infrastructure I decided to go ahead and build it.

Basically, I followed the steps presented in the following video. It's in Japanese, but it isn't hard to figure out what's going on. The device is simple and is based around a PWM unit for controlling power to the trolley.


As far as the guts of the thing are concerned the only major difference between theirs and mine is I use 2, 9v batteries connected in parallel for power. I was chatting about this project with a friend who's an expert in things electrical about my concern regarding draining the battery rather quickly given the grades on the layout. He suggested using two batteries in parallel to achieve longer life, so that's what I did. I haven't yet done a longevity test, that'll be for the winter.


The electrical access opening has always been a weak spot in the layout's design. By weak I mean visually weak even though it's structurally strong. It's just been a big opening for wiring access covered over by a piece of styrene velcroed to the layout with a power jack sticking out.


After some thought I decided to go with a homebrew '70s look by building out the opening with foam, blending it into the mountain with CelluClay, and velcroing on a control panel that reminded me of my '70s slot car setup, complete with advanced Dymo labelling technology :-)

The trolley runs quite smoothly and I'm happy with the controller's performance.  So happy I'm thinking of building a second trolley for double the fun!