I set up a temporary rig to see how steep a slope the LOL Mk. I could climb, This will determine the maximum grades on any Mt. Lowe inspired micro-layout I might build.
Shown in the photo is the maximum grade the trolley could climb without the motor sounding odd and the wheels slipping. I measured the grade to be about 11%. As a rule of thumb during layout construction I think I'll use an even 10% as the maximum. I foresee this trolley only carrying a 3D printed figure or two, so it won't haul any appreciable load.
I'm not sure if the layout I have in mind is feasible. I've made sketches and notes, but it's going to come down to testing and construction to figure out if it'll work. Knowing that the grades shouldn't go above 10% is another piece of the puzzle.
I closely scrutinized the ballast for Space Hopper evidence even though I didn't have my tinfoil hat or Geiger counter with me :-) No dice, but I made some important colour observations for ballasting the Havelock yard inspired micro layout.
And I picked up a trepass-free sample so I could get the colours right.
It's a DC powered Bachmann Alco S-2. It's a used item, but runs very well, and the body is in excellent shape. I need to try my hand at weathering and detail painting on this little thing. I've never seen one of these at Havelock yard in all the years I've visited, but it's in CP colours, so it thematically fits in, and also as important, it's small and fits in very well size-wise with the other items on the little layout.
MH&C say they're the oldest hobby shop in Canada, what with being established in 1946. That does make them considerably older than my regular hobby store, Ottawa's Hobby House, which had its 70th anniversary last September. The guys at MH&C were very friendly and helpful, and even knew a lot about Hobby House!
Experimentation into new casualized hybrids continues here at 30Squares Labs. Our last successful synthesis was the N2HOc compound, Ramsey's Garage. Our latest is the N2Sc-9 vehicle derived from Thaddeus Lowe's personal electric rail car he used to tour and inspect his Mt. Lowe electric railway. In this case the elements to be synthesized are a Kato N-gauge drive unit, product #11-108, and a scratch built S-scale superstructure based on the aforementioned Thaddeus Lowe vehicle.
I won't go into a full how-to, but just hit a few highlights, and discuss a little bit about its design.
For reference, I used photos on pages 45 and 48 in Charles Seims' book, Mount Lowe: The Railway in the Clouds, published by Golden West Books in 1976. My copy is the 6th printing from 1993.
I chose S as the scale and 9mm as the gauge for a few reasons.
The Kato drive unit looked about the right size when S scale figures stood beside it. It seemed too big for HO and too small for O. I should mention I settled on 9mm as the gauge because the Mt. Lowe inspired micro-layout I have in mind for this vehicle will have some sharp corners and steep climbs that I think only 9mm gauge track can handle.
There are going to be some automobiles in cameo appearances on the layout. Since many Hot Wheels and Matchbox toy cars are close to S, that scale seemed like a good choice for providing a variety of low cost, easily modifiable vehicles.
None of these design choices were made in a flash of brilliance. I hummed-and-hawed for a long time about what to do. And all thinking about the vehicle's design was always weighed against the layout I wanted it to run on. If I had tried to build a true representation of Thaddeus Lowe's vehicle, I wouldn't be able to run it on a micro layout, well, at least one I was capable of building.
The Kato drive unit is more or less box stock. The only modification was to clip off the stock couplers and epoxy on Kadee HO scale ones. You can see in the photo that I cut off the magnetic guides that trail from the Kadees. Later the unit was painted with mixtures of acrylic rust and grey paints.
The superstructure was mocked up with cardboard to test some ideas about size. I find that when doing casualized models it's important to test the item's dimensions against figures. If the item looks ok with respect to figures, it's on its way to being a viable model. In this case I also compared the figures and mockups to the book's photos of the real vehicle with people onboard and standing nearby. In the end I settled on a deck 5' wide and 15' long, with an 8' tall centre pole to support the trolley pole. In the above picture the centre pole is only about 7' tall, and, again, after some more humming-and-hawing, I decided it was too short.
The deck is built up from styrene scraps that I felt looked right. I know this is a sacrilegious way to go about construction, but I didn't have any prototype dimensions to work with and so decided to make something that didn't look too bad with respect to the figures. The deck isn't glued to the power unit, it's a tight friction fit, which I rather like since it makes it easy to clean or replace the drive unit.
The truck side frames were built up with the same devil-may-care attitude. I drew the frame outline on a piece of card and glued up the side frames on it. They're styrene strip stock.
The rivet and nut-and-bolt details - those brown dotty things in the photo - are Tichy Train Group items. Yes, these are way too large. I think of them more as greeblies instead of detail. Like greeblies their purpose is to provide a suggestion of detail and surface texture instead of prototypically accurate representations of actual fasteners.
The control station baskets are built up from styrene strips and Aluminum Micro-Mesh from Scale Scenes. The mesh was initially held in place with dabs of Weld Bond, but later was sandwiched between styrene strips as the basket was built up.
The detail items were scavanged from a variety of sources. The trolley pole is from an unpowered Bachmann HO scale trolley. This is just a placeholder until the layout is built when I'll replace this pole with something more suitable to the layout's geometry. The brake wheels are brake wheels pried off two HO scale freight cars in my scrap box. Those springs, which when cut down are used as the front and rear springs on the car, are from a 1/24 scale AMT Moonscope kit.
Here's the superstructure being test fit on the drive unit. At this stage it's just about ready for painting.
The centre pole is a piece of 1/8" diameter styrene tube. The poles on the ends of the control station baskets are 1/16" diameter styrene rod. Each brake wheel is connected to a piano wire shaft. Thread is used to cross tie the control basket poles.
In the previous photo I said the car was about ready for the paint shop because after taking the photo I remembered I had left off the stake pockets. They are bent up from 0.003" thick brass strips and superglued to the deck's side frames. Some of those big bolt greeblies were then superglued on to give a hint of how the stake pockets were attached.
Finally, it was weathered a bit with thin washes of Revell Aqua Color stone grey and flat black.
Here's a brief clip of the trolley running over a section of the Loonar Module. It can only run over a section because an S-scale vehicle is pretty big in an HO-scale world, even if it is narrow gauge :-)
Today Peter was telling me about a homebrew 'Criterion Closet' that was shot at his store. If you're a long time reader of this blog you might remember the model I made of Movies 'N' Stuff a few years ago. Some interesting picks, and you'll see a bit more inside Peter's store. If you're a movie lover in Ottawa, drop by the store. You won't regret it.
When we went to Nova Scotia we took VIA Rail's The Ocean. The service runs from Montréal to Halifax and takes 22 hours. For us, living in Ottawa as we do, the trip took a bit longer than that once you account for the train trip from Ottawa to Montréal, a couple hours or so of layover in Montréal before The Ocean's 7pm departure, and around 3 hours of delays on The Ocean part of the trip. I can't complain though because it was a great experience.
We booked a cabin in one of the sleeper cars. They're small, but comfortable for two. There're two seats, two fold down bunks, a fold down table, cubby holes for storage, and a toilet room - it's hidden behind the open door to the corridor in this photo.
Speaking of corridors, here it is. There were a few sleeper cars in the train. Maybe 4 or 5, I lost count walking through them all. A crew member told us the train was 19 cars long.
As well as the chair and sleeper cars there was a dining car, which if you're staying in a sleeper, eating here is included in your ticket. This meant dinner on the night out, and breakfast and lunch the next day. I think my Uncle Bill would have enjoyed this.
Contrary to the image on the menu, there isn't a dome top observation car - the so-called 'Park' car - attached to this train. According to Wikipedia and the crew VIA got rid of it a couple years ago due to some operational problem with no longer having access to track they needed to turn the train around. I can appreciate the technical issues, but look, if there is anyone from VIA reading this, you really need to figure out how to bring that car back. The views from this train are one of its draws, so I suspect you're losing out by not having it. Think about this: it only took us 1 hour and 25 minutes to fly on Porter airlines on the return trip from Halifax to Ottawa, so it isn't travel time that attracts the long distance traveller.
Ok, so enough grousing :-) The dining car has a lounge car attached to either end. One has an operating canteen and the canteen in the other car is closed. That photo up there is of the one with the closed canteen.
Here's that same lounge car, but looking towards the other end. It turns out Wifi seems to be only available in these two cars. It might be available in the chair cars, but it certainly didn't work in the sleepers.
And here we are in the second lounge car during the night leg after I had had a couple of 'beverages' from the canteen :-)
The most unusual car had to be this 'Transition' car. Basically it's used to couple dissimilar cars. For such a prosaic car it's very nicely appointed with wall-to-wall carpeting and framed pictures on the walls.
I didn't get any photos of the train when we got in to Halifax station as it was late and cold and we were focused on getting to our hotel. But, the next morning I got that shot of the train in Halifax awaiting its return to Montréal.
Would I do it again? Probably not, but I had to do it once and enjoyed it very much. Although, VIA Rail, if you're listening, I'd be glad to return and do a 22+ hour build of some sort of railroad model streamed on YouTube live from The Ocean, with proper sponsorship of course :-)