The record bins and checkout counter were installed in Stellas along with the LED light unit. I just need to add some stuff on the counter, like a cash register and maybe some loose records, a few customers, a cat, and that should wrap things up. Although, on the outside I still need a sign and some ads in the windows of the 'We buy good used vinyl' variety.
That reflection in the upper level? The big giant hand of course :-)
Monday, September 9, 2019
Sunday, September 8, 2019
Balsa: The Official Wood of 30 Squares
![]() |
| The Bookery's balsa facade |
Mr. Hertz notes that balsa wood, while neither unfamiliar to nor unused by a few model airplane builders prior to World War I, was to remain to most hobbyists for some time a rather mysterious and obscure material whose qualities and advantages were little known or understood, and was not readily available until the 1920's. And I assume if it was little known to model airplane builders, it might also have been little known to model railroaders of that era. Maybe model ship builders used it? That's something to look into.
Apparently in the pre-1920's era materials such as cane, reed, rattan, cigar-box wood, spruce, basswood, bamboo, poplar, maple, white holly, and birch were all used for various model airplane parts. But once balsa hit the scene, it took over.
In Model Railroader's archive the first mention of balsa is on page 7 of the June 1934 issue where it's noted that a Mr. Forest Fottler had built a baggage car of balsa wood. The first use of balsa wood as a primary construction material for a miniature building story in MR appears to be Small Station by Frank Taylor that appeared in the October '38 issue; however, he only recommends it as an alternative for the project in case a power saw isn't available to cut the recommended 1/8" 3-ply veneer for this HO scale model. Maybe balsa use was still catching on in the 1930s model railroad world even though it might have been fully adopted by model airplane builders.
Saturday, September 7, 2019
A&A facade framework
The skeleton for A&A's facade is more or less done. It's cut from 0.040 inch styrene and skeletal is the key word here. There wasn't much left after I cut out the openings for the windows and lightboxes.
The corrugated signboard is also 0.040 inch, so when it was glued to the skeleton it firmed up the structure quite a bit.
I think the frames for the signs will be the next step, or maybe the frame for the entrance.
The corrugated signboard is also 0.040 inch, so when it was glued to the skeleton it firmed up the structure quite a bit.
I think the frames for the signs will be the next step, or maybe the frame for the entrance.
Friday, September 6, 2019
Was The Chinese Cat loose in Washington DC?
Vince did a lot of research to figure out where that streetcar scene in The Chinese Cat was shot. It looks like the producers used stock footage of Washington D.C. streetcars. Ok, that video above is from the early 1950s and not 1944, but you can see the streetcars are quite similar to those in the movie, and the D.C. system at that time used the conduit system for power distribution, which is also seen in the movie. The similarities are similar, and I agree that D.C. is probably the location. Thanks Vince and it looks like a promotion to VP Research is in order ! :-)
Aero Miniature Flying Machine
![]() |
| Ad for the Aero Miniature Flying Machine; pg 197 in Hertz's airplane book |
Back in the day when I was new to model building and trying to read everything I could about the hobby, I checked out Mr. Hertz's books from the local library more times than I can remember. Back then I was mainly looking for information on construction techniques, and trying to see what was available. The thing I didn't realize at the time was that each book is an amazing reference volume on the early history of their respective fields. The aircraft book is probably the best example: Chapter 9, The Story of the Model Airplane, is a 90 page wonder of arcane scholarship. Ok, the book was published in 1967, and here we are 52 years later, so no doubt much has been learnt since then, but it makes for good reading in that it provides lots of clues for further internet searches to see where those clues might lead.
While reading Mr. Hertz's history of balsa as a material for model airplane construction, I stumbled across some discussion about the Aero Miniature Flying Machine, which Mr. Hertz claims was likely one of the first flying models to be manufactured and sold in the USA. Apparently is was first sold in or around 1909, and probably remained in production until around 1916. The model looks like a tailless biplane design with curved upper and lower wings. It sold for around $1 [the internet tells me this is about $28 in today's money], and it was claimed the 14" wingspan model could fly 100 ft. Another claim was that if a flight started upside-down, the plane would right itself. It sounds like an intriguing airplane, but I wasn't successful in finding more information with Mr. Hertz's clues. The search continues.
Subscribe to:
Posts (Atom)




